Archisalt Flower Of Salt Cross 48 x 48
Description
Combining elegance and design sophistication, Archisalt Flower of Salt Cross_ 48 * 48 porcelain tile excels as a refined surface solution for both indoors and outdoors. Achieve absolutely seamless luxury while enjoying the soft mineral tones and faint natural veining patterns of modern design.
Cross finish, like the one seen on this tile, is a unique form of pre-firing nano-grit application that creates a multi-functional surface, suitable for outdoor and indoor usage alike. Unlike other tiles, this piece will replicate the authentic look of sculpted stone due to its 8-10 layered high resolution inkjet printed mottled faces with a V2 variation rating. Its smooth edges are, furthermore, rectified, providing ultra smooth cuts resulting in clean grout joints bounding the tile. Additionally, the generously measured 48 * 48 format not only enhances the tile's flow but its configurational visual openness too. Scoring a PEI 4 durability rating, the tile is perfect and dependable in performance for residential settings and commercial buildings with medium foot traffic.
Specifications:
- Size: 48 x 48
- Finish: Cross (nano-grit indoor/outdoor matte finish)
- Material: Porcelain
- Variation Rating: V2 (subtle tonal variation across faces)
- Recommended Use: Residential floors & walls, medium-traffic commercial spaces, light institutional settings
Installation
MATERIAL INSPECTION
Our stones are natural products. For this reason, there will be naturally occurring variations in the color, pattern, texture, and veining that may differ from what was pictured. Before you begin installation, please inspect the goods for any damage or defects such as chipped edges, broken pieces. We cannot make any adjustments or provide service after the installation has begun.
INSTALLATION
We recommend that you dry-fit your pattern first. Think about the cuts in advance and visualize the installation. Make sure that you practice laying out the pattern. This will also help you plan out the placement of the pieces, which is especially helpful with tiles that have a lot of variation.
To avoid affecting the color of the tile, we highly recommend using white thinset mortar. For faster installation, use a rapid curing thinset mortar.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- Use a 3/16" or 1/4" square notch trowel when installing our marble material
- Prior to fixing the tiles in the mortar bed, use the flat side of the trowel prior to smooth down the ridges.
GROUTING
- For all-natural stone, we suggest using non-sanded grout in order to prevent scratching.
- Before grouting, test an area to make sure the stone surface will not scratch.
- Grout joints should be packed full. Do not leave pits or voids.
- Clean excess grout as you work. Do not let it harden completely.
- Never use acids to clean grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.
SEAL
After the stone is installed and grouted, seal the stone with an appropriate high-quality breathable stone sealer. This will minimize the potential for water absorption, efflorescence, and staining. If needed, a color enhancer may be applied to bring out the true color of the stone at any time after grouting. You may choose to reseal the tile when the stone gets darker or as needed.
CUTTING
For the best results, use a wet-saw with a new, continuous rim diamond blade designed to cut marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic: such teeth can result in a coarse cut, leading to a heavily chipped edge.
CARE AND MAINTENANCE
For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. To avoid leaving a film or causing streaks, avoid using too much cleaner or soap. When cleaning marble or limestone, do not use products that contain lemon, vinegar, or other acids. Do not use any abrasive cleaners.
Combining elegance and design sophistication, Archisalt Flower of Salt Cross_ 48 * 48 porcelain tile excels as a refined surface solution for both indoors and outdoors. Achieve absolutely seamless luxury while enjoying the soft mineral tones and faint natural veining patterns of modern design.
Cross finish, like the one seen on this tile, is a unique form of pre-firing nano-grit application that creates a multi-functional surface, suitable for outdoor and indoor usage alike. Unlike other tiles, this piece will replicate the authentic look of sculpted stone due to its 8-10 layered high resolution inkjet printed mottled faces with a V2 variation rating. Its smooth edges are, furthermore, rectified, providing ultra smooth cuts resulting in clean grout joints bounding the tile. Additionally, the generously measured 48 * 48 format not only enhances the tile's flow but its configurational visual openness too. Scoring a PEI 4 durability rating, the tile is perfect and dependable in performance for residential settings and commercial buildings with medium foot traffic.
Specifications:
- Size: 48 x 48
- Finish: Cross (nano-grit indoor/outdoor matte finish)
- Material: Porcelain
- Variation Rating: V2 (subtle tonal variation across faces)
- Recommended Use: Residential floors & walls, medium-traffic commercial spaces, light institutional settings
MATERIAL INSPECTION
Our stones are natural products. For this reason, there will be naturally occurring variations in the color, pattern, texture, and veining that may differ from what was pictured. Before you begin installation, please inspect the goods for any damage or defects such as chipped edges, broken pieces. We cannot make any adjustments or provide service after the installation has begun.
INSTALLATION
We recommend that you dry-fit your pattern first. Think about the cuts in advance and visualize the installation. Make sure that you practice laying out the pattern. This will also help you plan out the placement of the pieces, which is especially helpful with tiles that have a lot of variation.
To avoid affecting the color of the tile, we highly recommend using white thinset mortar. For faster installation, use a rapid curing thinset mortar.
- Apply as much adhesive as can be covered within 10-15 minutes.
- Grout joint should be a minimum of 1/16” and not butt set.
- Use a 3/16" or 1/4" square notch trowel when installing our marble material
- Prior to fixing the tiles in the mortar bed, use the flat side of the trowel prior to smooth down the ridges.
GROUTING
- For all-natural stone, we suggest using non-sanded grout in order to prevent scratching.
- Before grouting, test an area to make sure the stone surface will not scratch.
- Grout joints should be packed full. Do not leave pits or voids.
- Clean excess grout as you work. Do not let it harden completely.
- Never use acids to clean grout haze.
- Use a damp sponge for the final cleaning and to smooth out the grout joints.
- We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.
SEAL
After the stone is installed and grouted, seal the stone with an appropriate high-quality breathable stone sealer. This will minimize the potential for water absorption, efflorescence, and staining. If needed, a color enhancer may be applied to bring out the true color of the stone at any time after grouting. You may choose to reseal the tile when the stone gets darker or as needed.
CUTTING
For the best results, use a wet-saw with a new, continuous rim diamond blade designed to cut marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic: such teeth can result in a coarse cut, leading to a heavily chipped edge.
CARE AND MAINTENANCE
For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. To avoid leaving a film or causing streaks, avoid using too much cleaner or soap. When cleaning marble or limestone, do not use products that contain lemon, vinegar, or other acids. Do not use any abrasive cleaners.
Enduring Lines. Elegant Flow
Free Design Consultation
Transform your space with expert guidance! Our Free Design Consultation service helps you choose the perfect tiles for your home or project. Whether you're remodeling your kitchen, bathroom, or an entire space, our tile specialists will provide personalized recommendations based on your style, budget, and needs.
- Design to delivery
- Curated samples
- One-on-one with designer
- Dedicated follow-ups
- Schedule your interview
(FAQs) Frequently Asked Questions
What makes the Cross finish different from standard matte or grip tiles?
The Cross finish possesses balance between gripping texture and refined matte smoothness, suitable for both interior and exterior use due to nano-grit technology applied before firing.
Can this tile be used for both floors and walls?
Yes, both outdoor and indoor settings can utilize these tiles for dramatic wall installations or large open floor areas because the Cross finish enhances the 48x48 format.
