Brickstone Red Brick 2x18 Matte Porcelain Floor & Wall Tiles

Enhance the aesthetic beauty of your space with Brickstone Red Brick 2 x 18 Matte Porcelain Tile that has the timeless charm of vintage styling. The tile replicates the stunning beauty of reclaimed red brick in its modern elongated design while adding architectural appeal to any surface. Its weathered hues of rich red coupled with a textured matte finish brings to mind vintage masonry while, at the same time, offering the advantages of porcelain durability.

The Brickstone Red Matte porcelain tile is ideal for herringbone, stacked, and running bond patterns due to the 2 x 18 size offering dramatic linear layouts. farmhouse, industrial, and rustic interiors tend to go for that vintage inspired style which is perfect for moving off the vertical surfaces designed tiles. It can be placed around the fireplace, kitchen, and in feature walls or used for bathroom walls and even as a kitchen backsplash.

• Size:  2” x 18”
• Finish:  Matte 
• Material:  Porcelain
  
• Ideal For:  Fireplace surrounds, backsplashes, bathroom walls, accent walls, mudrooms
  

MATERIAL INSPECTION

Our stones are natural products. For this reason, there will be naturally occurring variations in the color, pattern, texture, and veining that may differ from what was pictured. Before you begin installation, please inspect the goods for any damage or defects such as chipped edges, broken pieces. We cannot make any adjustments or provide service after the installation has begun.

INSTALLATION

We recommend that you dry-fit your pattern first. Think about the cuts in advance and visualize the installation. Make sure that you practice laying out the pattern. This will also help you plan out the placement of the pieces, which is especially helpful with tiles that have a lot of variation.

To avoid affecting the color of the tile, we highly recommend using white thinset mortar. For faster installation, use a rapid curing thinset mortar.

• Apply as much adhesive as can be covered within 10-15 minutes.
• Grout joint should be a minimum of 1/16” and not butt set.
• Use a 3/16" or 1/4" square notch trowel when installing our marble material
• Prior to fixing the tiles in the mortar bed, use the flat side of the trowel prior to smooth down the ridges. 

GROUTING

• For all-natural stone, we suggest using non-sanded grout in order to prevent scratching.
• Before grouting, test an area to make sure the stone surface will not scratch.
• Grout joints should be packed full. Do not leave pits or voids.
• Clean excess grout as you work. Do not let it harden completely.
• Never use acids to clean grout haze.
• Use a damp sponge for the final cleaning and to smooth out the grout joints.
• We highly recommend applying grout release prior to grouting the tile to facilitate cleaning and for protection against staining from contrasting color grouts.

SEAL

After the stone is installed and grouted, seal the stone with an appropriate high-quality breathable stone sealer. This will minimize the potential for water absorption, efflorescence, and staining. If needed, a color enhancer may be applied to bring out the true color of the stone at any time after grouting. You may choose to reseal the tile when the stone gets darker or as needed.

CUTTING

For the best results, use a wet-saw with a new, continuous rim diamond blade designed to cut marble. Do not use “turbo” or other notched blades designed for use with porcelain or ceramic: such teeth can result in a coarse cut, leading to a heavily chipped edge.

CARE AND MAINTENANCE

For normal care and maintenance of stone tiles, clean stone surfaces with a few drops of neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. To avoid leaving a film or causing streaks, avoid using too much cleaner or soap. When cleaning marble or limestone, do not use products that contain lemon, vinegar, or other acids. Do not use any abrasive cleaners.