I Travertini Black Tile

I Travertini Black is a black porcelain tile offered in glossy and matte finishes and in 2 sizes, from 16 by 32 up to 24 by 48 inches. As a through-fired porcelain it needs no sealing and shrugs off stains, scratches, and cleaning chemicals, keeping its face in busy rooms and wet zones alike. The finish sets its mood: glossy bounces light around smaller rooms, while matte reads calm and contemporary with grip underfoot. On floors or walls it keeps a consistent face across large areas where fewer grout lines matter.

Black is decisive underfoot and dramatic on walls, sharpening whites and metallics around it. Keep surrounding surfaces light to let the dark field carry the room. The large format minimizes grout lines and lets the surface run uninterrupted, which suits open, modern layouts.

Porcelain tile is a dense, low-porosity ceramic fired from refined clay at temperatures above 1,200°C (2,200°F), which vitrifies the body into a hard, water-resistant surface. Certified porcelain absorbs less than 0.5 percent of its weight in water under the ASTM C373 test, and that low absorption is what lets it handle wet rooms, freeze-thaw climates, and heavy foot traffic without cracking or staining. Stone-look and wood-look porcelain takes its pattern from high-resolution digital printing applied before firing, so the design runs crisp and consistent across every piece while the body underneath stays far tougher than the natural surface it imitates. Unlike natural stone, porcelain needs no sealing and does not etch under acidic cleaners, which makes it a low-maintenance choice for kitchens, bathrooms, and busy floors.

Porcelain tile should be set with a polymer-modified thin-set mortar rated for porcelain over a flat, clean, dry substrate. Rectified porcelain, with machine-squared edges, allows tight grout joints down to about one-eighth inch, while pressed-edge tile needs a slightly wider joint to absorb minor size variation. Porcelain requires no sealing, because its body is already vitrified and non-absorbent; only cement grout benefits from a sealer. Clean it with water or a pH-neutral cleaner, and unlike natural stone it tolerates most household cleaners without etching. For large-format pieces, use a tile-leveling system and back-butter each tile for full mortar coverage, which prevents lippage across the wider surface.