SAGE GREEN SPLITFACE Hardscape - 6x12x6

SAGE GREEN SPLITFACE Hardscape - 6x12x6 is a green porcelain mosaic tile offered in a 6 by 12 format. Its porcelain body is non-porous by the ASTM C373 standard, so showers, entryways, and high-traffic floors are all within its rating. Sheet-mounted for even spacing, it is at home on backsplashes, shower floors and walls, and feature strips.

Green ties an interior to the landscape, pairing with natural wood, terracotta, and unlacquered brass. Deeper greens read formal; lighter ones read botanical. As a mosaic, the joint pattern is part of the design; grout color choice changes the whole read of the sheet.

Porcelain tile is a dense, low-porosity ceramic fired from refined clay at temperatures above 1,200°C (2,200°F), which vitrifies the body into a hard, water-resistant surface. Certified porcelain absorbs less than 0.5 percent of its weight in water under the ASTM C373 test, and that low absorption is what lets it handle wet rooms, freeze-thaw climates, and heavy foot traffic without cracking or staining. Stone-look and wood-look porcelain takes its pattern from high-resolution digital printing applied before firing, so the design runs crisp and consistent across every piece while the body underneath stays far tougher than the natural surface it imitates. Unlike natural stone, porcelain needs no sealing and does not etch under acidic cleaners, which makes it a low-maintenance choice for kitchens, bathrooms, and busy floors.

Porcelain tile should be set with a polymer-modified thin-set mortar rated for porcelain over a flat, clean, dry substrate. Rectified porcelain, with machine-squared edges, allows tight grout joints down to about one-eighth inch, while pressed-edge tile needs a slightly wider joint to absorb minor size variation. Porcelain requires no sealing, because its body is already vitrified and non-absorbent; only cement grout benefits from a sealer. Clean it with water or a pH-neutral cleaner, and unlike natural stone it tolerates most household cleaners without etching. For large-format pieces, use a tile-leveling system and back-butter each tile for full mortar coverage, which prevents lippage across the wider surface.