

Olympus Black Nominal Tile
$12.6
/sqft
$33.64 /piece
1 piece covers 2.67 sqft
1 piece covers 2.67 sqft
Quantity Calculator
* Min. order:
7 Pieces
Estimated Total
$0

Olympus Black Nominal Tile
Sale price$33.64
Overview
Olympus Black Nominal is a porcelain tile offered in 2 sizes, from 16 by 24 up to 24 by 24 inches. Fired dense enough to absorb less than 0.5 percent water under ASTM C373, it handles wet areas, heavy traffic, and temperature swings without sealing. It lays a clean, continuous field across floors and walls in both residential and commercial rooms.
Design & Color Guide
The large format minimizes grout lines and lets the surface run uninterrupted, which suits open, modern layouts.
About Porcelain
Porcelain tile is a dense, low-porosity ceramic fired from refined clay at temperatures above 1,200°C (2,200°F), which vitrifies the body into a hard, water-resistant surface. Certified porcelain absorbs less than 0.5 percent of its weight in water under the ASTM C373 test, and that low absorption is what lets it handle wet rooms, freeze-thaw climates, and heavy foot traffic without cracking or staining. Stone-look and wood-look porcelain takes its pattern from high-resolution digital printing applied before firing, so the design runs crisp and consistent across every piece while the body underneath stays far tougher than the natural surface it imitates. Unlike natural stone, porcelain needs no sealing and does not etch under acidic cleaners, which makes it a low-maintenance choice for kitchens, bathrooms, and busy floors.
Explore Porcelain TileInstallation & Care
Porcelain tile should be set with a polymer-modified thin-set mortar rated for porcelain over a flat, clean, dry substrate. Rectified porcelain, with machine-squared edges, allows tight grout joints down to about one-eighth inch, while pressed-edge tile needs a slightly wider joint to absorb minor size variation. Porcelain requires no sealing, because its body is already vitrified and non-absorbent; only cement grout benefits from a sealer. Clean it with water or a pH-neutral cleaner, and unlike natural stone it tolerates most household cleaners without etching. For large-format pieces, use a tile-leveling system and back-butter each tile for full mortar coverage, which prevents lippage across the wider surface.
Specifications
Key Specs
- Material
- Basalt
Frequently Asked Questions
Does Olympus Black Nominal need to be sealed?
No. Porcelain absorbs less than 0.5 percent water by the ASTM C373 standard, so the tile itself never needs sealing. Only the grout joints benefit from a sealer once cured.
What sizes does Olympus Black Nominal come in?
This page carries 16 by 24 / and 24 by 24 /. Select a size above to see its price and per-box coverage, and the calculator converts your square footage into boxes.
How do I know how many pieces to order?
Each option lists its own price per piece. Enter your square footage in the calculator above where coverage data is available, or count the linear run of your edges and transitions for trim pieces.
Can Olympus Black Nominal be used in a shower?
Yes. Porcelain is rated for wet areas, including shower walls and floors. Pair it with a waterproofed substrate and sealed grout joints for a watertight installation.


















